Handmade Knives of Damascus (pattern welded) and High-Carbon Steel - SOLD

Number 7901 above. this knife is made of 1084/15-N-20 in damascus that is random and then some. I doubt that I could reproduce this pattern. The pattern is more dramatic than the photo shows. The handle wood stabilized maple burl with red spacers and fittings of German silver. The blade is 3 5/16 inches long by about 1 1/16th inch at its widest. Overall length of the knife is about 8 inches. File work on the spine.



Number 7902 above. this knife is made of 1084/15-N-20 in a striped damascus. The handle wood Cocobolo. Fancy pins. The blade is 4 3/8 inches long by about 1 3/16ths at its widest with a false edge that is 1 3/4 inch long - full tang. Overall length of the knife is almost 8 3/4 inches. File work on the spine.





NEW. Number 7903 above. this knife is made of 1084/15-N-20 in twist over W's pattern damascus. The handle is pink ivory wood with fancy pins. The blade is 3 3/4 inches long by about 1 1/16th at its widest - full tang. Overall length of the knife is just over 7 1/2 inches. File work on the spine.





Number 2021 above. this knife is made of 1084/15-N-20 in random damascus. The handle wood Cocobolo. The blade is 3 3/8 inches long by about 3/4 at its widest. Overall length of the knife is 7 inches. File work on the spine.

Number 2020 above. this knife is made of 1084/15-N-20 in four bar twist damascus pattern. The handle wood Cocobolo. The blade is 4 inches long by 1 1/8 at its widest. Overall length of the knife is 7 5/8 inches. The filework on the spine runs from the middle of the blade to the back of the handle.

Number 9954 above. This medium sized utility knife is made from 1084/15-N-20 in a wild twist pattern. This Damascus has been polished which really adds to the appearance of the blade. This is a full tang knife. The blade is 3 3/4 inches long by 1 1/8 inches wide and is flat ground from edge to spine. Overall length is 7 9/16 inches. The bolsters are made from Mosaic Damascus. The handle material is Mexican Kingwood. Mosaic Pins. Filework.






Number 5688 above. This small utility knife is made from 1084/15-N-20 in Raindrop pattern Damascus. The blade is 3 1/4 inchs long by 3/4 inch wide. Overall length is just under seven inches. This is a full-tang knife. The blade is flat ground from edge to spine. The handle is African Blackwood and has Nickle silver pins. Filework on the spine. Comes with a sheath.




Number 5556 above. This small utility knife is made from 1084/15-N-20 in polished Raindrop pattern Damascus. The blade is 3 1/4 inchs long by 3/4 inch wide. Overall length is just under seven inches. This is a full-tang knife. The blade is flat ground from edge to spine. The handle is Cocobolo and has nickle silver pins. Filework on the spine. Comes with a sheath.






Number 5555 above. This small utility knife is made from 1084/O1 in random Damascus. The blade is 3 3/8 inchs long by 5/8 inch wide. Overall length is 7 1/2 inches. The blade is flat ground from edge to spine. The handle is Purpleheart. Nickle silver fittings SOLD




Number 1776 above. This hefty Bowie-style knife is made from 324 layers of 1084/15-N-20 pattern welded steel in random pattern. The blade is 9 7/16 inches long by 1 5/8 inches wide and is flat ground from edge to spine. The blade is just over 1/4 (0.2625) inch thick at the thickest part. The fittings are also of random pattern Damascus and are grooved around their periphery. The handle material is Desert Ironwood. Overall length of the knife is 14 9/16 inches.





Number 1778. This small lightweight utilty knive is made in of 15-N-20 and 1084 in a clean clear ladder pattern. The blade is flat ground. Nickle silver pins and fancy filework on the spine. The handle wood is Goncalo Alves. Blade length is 3 3/8 inches. Width is 11/16 inch. Overall length is 6 7/8 inches. This knife is harder than larger knives for better edge retention. Do not pry with this blade.

Number 1783. The piece above is 8 inches overall with a flat ground blade that is 3 5/8 inches long by 1 1/16 inch wide with filework on the spine. The damascus pattern is a ladder over a twist made from 1084 and 15-N-20 steels. Fancy pins. The handle wood is cocobolo. With sheath.




Number 1784. The piece above is 7 1/4 inches overall with a flatground blade that is 3 5/8 inches long by 1 inch wide with filework on the spine and fancy pins. The damascus pattern is ladder over twist with 1084 and 15-N-20 The handle wood is Goncalo Alves.




Number 8745. This knife is made with 1084/15-N-20 combination steel. This pattern is called "Ikat". The blade is five inches long by 1 1/8 inches wide, is flat ground, and has filework on the spine. The blade is 0.166 thick at the thickest part of the spine and has a distal taper. Fittings are of German silver with red spacers. Handle material is Desert Ironwood. Overall length of the knife is 9 3/4 inches with a handle that is a little longer than most. Comes with a leather sheath.




Number 1779. This is a utility knife with a blade made of 15-N-20/1084 - flat gound. The pattern looks like a twist but is a little more complicated. The handle material is African Blackwood. Nickle silver pins. The blade length is 3 5/16 inches. Width is 3/4 inch. Thickness is 0.120 inches. Overall length is 6 7/8 inches. This knife is harder than larger knives for better edge retention. Do not pry with this blade. Comes with a sheath.



Number 318. This is a utility knife with a blade made of ladder pattern damascus in pure nickle and 1095 - flat ground. The handle material is cocobolo with red spacers. Fittings are German silver. Blade length is 4 inches with filework on the spine. Width is 3/4 inch. Thickness is 0.148 inches. Overall length is 8 3/16 inches. Price




Number 6027. This is a small utility knife made of random pattern O1/1095 damascus - flat ground. The handle wood is Goncalo Alves, a hardwood from Mexico. Fittings are German silver with red spacers. Blade length is 4 inches. Width is 5/8 inch. Overall length is 8 1/4 inches.






Number 316. This is a utility knife with a blade made of four twisted bars of 15-N-20 and 1084 damascus - flat ground. The handle material is black micarta. Fittings are twist damascus. Blade length is 4 1/16 inches with filework on the spine. Width is just over 1 1/8 inch. Thickness is 0.140 inches. Overall length is 8 3/8 inches.



Number 317. This is a utility knife with a blade made of four twisted bars of 15-N-20 and 1084 damascus - flat ground. The handle material is cocobolo with red spacers. Fittings are German silver. Blade length is 3 7/8 inches with filework on the spine. Width is just over 1 3/16 inch. Thickness is 0.138 inches. Overall length is 8 5/16 inches.



Number 320. This is a utility knife with a blade made of random pattern O1 and 1084 - flat ground. The handle material is cocobolo in the front and Goncalo Alves toward the back with red spacers. Fittings are German silver. Blade length is 3 7/16 inches. Width is just over 5/8 inch. Thickness is 0.148 inches. Overall length is 7 1/2 inches.



Number 6026. This is a Wharncliff style knife made of random pattern O1/1095 damascus - flat ground. The handle wood is Maple Burl. Fittings are German silver. Blade length is 2 7/16 inches. Width is 9/16 inch. Overall length is 6 5/8 inches. SOLD



Number 6024. This is a dagger done in two-bar twist damascus made of L6 and 1095. The handle wood ins Cocobolo and is polished to a glass-like finish. Fittings are German silver. The pommel is oval rather than round as the photo might suggest. Blade length is 5 1/4 inches. Width is 3/4 inch. Overall length is 9 3/8 inches. SOLD



This piece is 7 1/2 inches overall with a blade that is just under 3 1/2 inches long by 11/16 inch wide. The fittings are nickel silver and the handle material is African Blackwood. The damascus is a very fine ladder pattern. The blade is made from L6 and 1095 steels. This piece comes with a leather sheath dyed black in basketweave pattern with a clip on the back.





This dagger is 13 5/8 inches long overall. The blade is 8 7/8 inches long and one inch wide. The fittings are satin finish nickle silver and the handle is satin finish East African blackwood. There are two red spacers. The blade is a three-bar interrupted twist damascus pattern. SOLD






This piece is 9 5/8 inches overall with a blade that is 5 1/8 long by 1 inch wide. The nickel silver fittings and cocobolo handle are satin finished. The photo does not show it well but the pattern in the steel is ladder pattern with the light colored metal predominating. The blade is made from L6 and mild steel. There is a piece of Austrailian Jade (chrysophrase) set in sterling silver on the pommel.


The piece below is 8 5/8 inches overall with a blade that is 4 5/8 inches long by 15/16 inch wide. The blade is a three-bar twist pattern. The handle is made of East African Blackwood. There is one "fancy pin" of brass and stainless steel and a smaller brass pin. SOLD

The small utility knife above is 8 1/4 inches overall with a four inch blade. The blade is 192 layers of twisted damascus. The handle is black micarta. Pins are nickle silver. SOLD

NEW. Number 5515 above. Made with 1084/15N20 in Ladder pattern Damascus. This blade was hot salt blued. The handle is Desert Ironwood with a wide red spacer and smaller German Silver and black spacers.. The blade is 4 15/16ths inches long by about 1 1/8 inch wide. Overall length of the knife is about 8 3/8ths inches. German Silver fittings. File work on the spine.





NEW. Number 3018 above. Made with 1084/15N20 in "Campfires" pattern Damascus. This blade was hot salt blued. The handle is Stabilized Maple Burl with a wide red spacer and smaller German Silver and red spacers.. The blade is 4 13/16ths inches long by about 1 inch wide. Overall length of the knife is about 9 1/4 inches. German Silver fittings. File work on the spine.





NEW. Number 3017 above. Made with 1084/15N20 in twist pattern Damascus. The handle is Stabilized Maple Burl and Desert Ironwood with German Silver and red spacers.. The blade is 4 15/16ths inches long by about 1 inch wide. Overall length of the knife is about 9 1/2 inches. German Silver fittings. File work on the spine.



Number 7771 above. Camp/Utility knife made with 1084/15-N-20 Damascus in a ladder pattern variation. This blade was hot salt blued. The handle is Desert Ironwood that has beautiful depth and figuring. There is a wide red spacer and smaller black and German silver spacers.. The blade is 3 7/8 inches long by about 1 1/4 inch wide. Overall length of the knife is about 8 1/8th inches. German Silver fittings. File work on the spine.



Number 7782 above. Made with 1084/15-N-20 Damascus in a ladder pattern variation. This blade was hot salt blued. The handle is stabilized maple burl with a wide red spacer and smaller black and red spacers.. The blade is 4 7/8 inches long by about 15/16ths inch wide. Overall length of the knife is about 9 1/2 inches. German Silver fittings. File work on the spine.

Click here to return to Knife and Axe Page

Click here to return to Home Page

To order or send e-mail:

Raymond Coon
raymond@damascusknife.com