Because some people have been unable to load
this page due to the large file sizes I have changed the format. Each knife now has one photo that is a
clickable link. Click on the photo
and you will be taken to another page that will give you more detailed photos
and information about that knife.
Folding Knives.
If you would like to be notified when new
items become available please contact me at the e-mail address near the bottom
of this page.
Model 525
The Model 525 is a liner lock folder of
my own design. I use a
15N20/1084 tool steel combination to make the Damascus.
On all of my folders the bolsters are dovetailed and natural handle
materials are always stabilized.
The liners are made of 6AL4V Titanium. Anodizing in various colors is also
available. Custom Scrimshaw makes
these knives truly one of a kind.
The back spacers are typically 440C stainless steel, blued mild steel,
or Damascus steel. Overall length
of the knife is 8 inches. The blade
is 3 ½ inches long and just under one inch wide.
2938 Above – click on
the photo
2963 Above– click on
the photo
2976 Above– click on
the photo
Click on the image above for a
description and more photographs.
Click on the image above for a
description and more photographs.
Click on the image above for a
description and more photographs.
Model 414
The Model 414 is a liner lock folder of
my own design. I make
my own Damascus so almost any pattern that you might
want is available. I use a
15N20/1084 high carbon steel combination to make the Damascus.
On all of my folders the bolsters are dovetailed and natural handle
materials are always stabilized.
The liners are made of 6AL4V Titanium. Anodizing in various colors is also
available. Scrimshaw makes these
knives truly one of a kind. Custom
designs in scrimshaw are also an option.
Please see the examples below.
The back spacers are typically 440C stainless steel or Damascus
steel. Overall length of the knife
is 7 ¼ inches. Blade length
is 3 1/8. Blade thickness is
approximately 0.100 inch. Overall
knife thickness is 0.375 inch. We
will work with you to get exactly what you want in Scrimshaw.
▲ None available
at this time. ▲
Model 303
This model is also of my own design. Below are some of the variations in Damascus pattern and handle materials that I have
used on this knife. I make my own Damascus so almost any pattern that you might
want is available. I use a
15N20/1084 tool steel combination to make the Damascus.
On all of my folders the bolsters are dovetailed and the handle
materials are always stabilized.
The liners are made of 6AL4V Titanium and are “jeweled” on
inner surfaces. Anodizing in
various colors is also available.
The back spacers are typically 440C stainless steel with file work. Blade length is 2 3/4 inches by 15/16th
inch wide. Overall length of the knife is 6 inches. Descriptions are below the
knives.
Click on the image above for a
description and more photographs.
If you would like to be put on a list so
that you will be notified when new
pieces become available please contact me at the e-mail address below.
Please click here
to see examples of other knives I have made.
Click here to return to Home Page
To order or send e-mail:
Raymond Coon
raymond@damascusknife.com
Or call me at: (503) 658-2252 in the Portland, Oregon area.
04/21/04